I don't have it disabled, interestingly I noticed that ECT2 changes normally when logged by ktuner but it stays at 35 degrees when monitored by my scan tool!
I will check with a different scan tool later today, I'll also re-flash the ecu and see what happens..
Search found 28 matches
- Tue Apr 25, 2023 8:51 pm
- Forum: 07-08 TSX Specific
- Topic: ECT2 stuck at 35 degrees
- Replies: 3
- Views: 2720
- Sat Apr 22, 2023 11:08 pm
- Forum: 07-08 TSX Specific
- Topic: ECT2 stuck at 35 degrees
- Replies: 3
- Views: 2720
ECT2 stuck at 35 degrees
I've noticed that ECT2 temp is stuck at 35 degrees leading to both oxygen sensor and catalyst monitors not running, with my scan tool I viewed ECT2 sensor voltages which changes from 3.6volts at cold start down to 1.7 volts at normal operating temps but the parameter for ECT2 temp never changes from...
- Fri Nov 11, 2022 10:02 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
Just wanted to thank you for the fix, I did test the latest version and can confirm I have no problem utilizing the full scale of the stock Map sensor up to 10.5 PSI
- Wed Sep 14, 2022 6:31 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
Any updates?
- Wed Aug 31, 2022 2:19 am
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
That would be great, Thanks
- Tue Aug 30, 2022 9:43 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
Is there any way to change that limit to at least make full use of the stock MAP sensor 10 PSI range? I expected a limit like this would be removed by Ktuner I noticed in data logs that MAP value kept increasing so the ECU has no issue reading more than 8 PSI , it only disrupts the commanded duty cy...
- Tue Aug 30, 2022 7:40 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
The fuel status switching has mostly stopped (stays in open loop) but the issue still continues with cutting duty cycle in half and I get a rapid zigzag duty cycle pattern and the only trigger is the ECU seeing MAP above 8PSI Here are the 2 tests I did to figure out if there are other variables invo...
- Fri May 27, 2022 1:16 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
Lowered the boost to 7 PSI and that seems to cure it but need to do a few more pulls to confirm, looking back at older logs the issue starts as soon as I go over 8 PSI (max boost was 8.4)
any idea what's causing this?
any idea what's causing this?
- Sun May 22, 2022 5:38 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
I understand that base map is only a strating point, I do have a tuned map that runs much better and it was doing the same thing, I went back to base map to rule out any tuning mistakes/issues or flashing errors.. I can't seem to attach my log or at least a screenshot. I appreciate your input on thi...
- Sat May 21, 2022 8:45 pm
- Forum: 07-08 TSX Specific
- Topic: fuel status 1 issue
- Replies: 15
- Views: 11734
Re: fuel status 1 issue
my attachment is not showing up for some reason