Search found 3707 matches
- Wed Feb 28, 2024 3:59 pm
- Forum: K Swapped Vehicles
- Topic: FLEX sensor pin
- Replies: 5
- Views: 2236
Re: FLEX sensor pin
Yes and the ground can be connected to the common ground for the sensor.
- Sat Feb 24, 2024 3:24 pm
- Forum: 18+ Accord Specific
- Topic: Gauntlet of warnings after flashing
- Replies: 9
- Views: 11604
Re: Gauntlet of warnings after flashing
If you don't have mode switching you likely disabled something you shouldn't have.
- Wed Feb 21, 2024 11:14 am
- Forum: K Swapped Vehicles
- Topic: FLEX sensor pin
- Replies: 5
- Views: 2236
Re: FLEX sensor pin
Rev 1.1 is a Rev 1. Ground can be used as common ground, not to ground the sensor completely.
- Wed Feb 21, 2024 11:12 am
- Forum: TSX / CL9 Euro-R Accord Platform
- Topic: Honda accord cl9
- Replies: 3
- Views: 1473
Re: Honda accord cl9
We don't directly support the CL9 and the TSX page is clear that we don't support automatic TSX with the Accord ECUs.
- Sat Feb 17, 2024 5:09 pm
- Forum: 03-06 Element Specific
- Topic: k24a4 w/ crv awd auto trans
- Replies: 4
- Views: 1627
Re: k24a4 w/ crv awd auto trans
You should run the appropriate ECU for the setup, which you'll lose outputs and will need drive by wire to do so with that ECU.
- Fri Feb 16, 2024 10:48 pm
- Forum: 03-06 Element Specific
- Topic: k24a4 w/ crv awd auto trans
- Replies: 4
- Views: 1627
Re: k24a4 w/ crv awd auto trans
There's no guidance I can offer you on that since we don't support the CRV.
- Mon Feb 05, 2024 9:16 pm
- Forum: CR-Z Platform
- Topic: Boost?
- Replies: 35
- Views: 54020
Re: Boost?
There's nothing from a CivicX/AccordX that would apply.
- Mon Feb 05, 2024 1:43 am
- Forum: General Questions
- Topic: Problem about Ktuner V2 and flashing Acura TL 2013
- Replies: 1
- Views: 1067
Re: Problem about Ktuner V2 and flashing Acura TL 2013
Having the KTuner unit plugged in and operational can't affect the vehicle's operation. If you didn't see live data you may not have had it plugged in properly. Otherwise look for other issues.
- Wed Jan 31, 2024 4:26 pm
- Forum: General Questions
- Topic: Is the Integra Base Auto ECU compatible with the KTuner End Board? Can anyone confirm this?
- Replies: 1
- Views: 898
Re: Is the Integra Base Auto ECU compatible with the KTuner End Board? Can anyone confirm this?
Applications are listed on our application page. Each application page has compatible ECU numbers so you can check for yours.
- Wed Jan 31, 2024 4:25 pm
- Forum: 13-17 Accord i4 Specific
- Topic: No pops above 3k rpm
- Replies: 2
- Views: 1027
Re: No pops above 3k rpm
Pops and bangs are not something we can help you with.