TPS Calibration Issues (Continued)
-
- Posts: 76
- Joined: Sun Aug 18, 2013 8:16 pm
Re: TPS Calibration Issues (Continued)
Ha ha ha, no I copied over the ignition tables from the PZD to the PRB. What I couldnt figure out is why at idle the table ignition read 30* but the actual ignition was at 0*. The PZD ignition did not do this, but like I said there was probably a setting or something I missed or mixed up.
Re: TPS Calibration Issues (Continued)
Idle ignition parameters are right there in parameters, as idle ignition overrides the standard ignition tables. Hence the setting for .5% TPS when no IACV is used. You would have noticed that previously when your TPS read 0, but obviously when it was over .5 it would be running from the main ignition tables.
-
- Posts: 76
- Joined: Sun Aug 18, 2013 8:16 pm
Re: TPS Calibration Issues (Continued)
That would make sense, thanks!