Good evening, I have recently replaced my OEM TPS for an Acuity, reason being was because at WOT the OEM only read to 81%. Even after adjustment on the software. So, I replaced it thinking it was bad.
Now, the Acuity is doing the same. I manually adjusted it using my voltmeter and their instructions, and verified on the software. at 0% throttle, software displays just that, 0%. At Full throttle it does not go pass 81%. The butterfly is all the way open when the pedal is fully depressed.
Is there something I am doing wrong? Or is the software limited to that 81%?
Thank you in advance!!!
TPS read during logging
Re: TPS read during logging
That's a normal reading for those years. Nothing to do with the software.
-
- Posts: 14
- Joined: Tue Apr 21, 2020 2:33 am