'01 DC2 with a K24 swap using the kswap ecu.
Everything is working and the car runs awesome. I do track the car a lot and would like to collect logs randomly depending on the track and condition. Since I do not have AC installed, I figured I set the AC switch on the dash to active the onboard logging. However, no mater what setting I choose for activation, it doesn't start logging. When I set it to always on, the car logs onboard no problem. Setting it to the AC Controller to AC Multiplex has no affect. Do I need to jump something on the AC compressor harness/plug since I don't have an AC compressor plugged in?
Craig - Whos hoping to not need a wired switch for logs
AC Switch to activate onboard logging
Re: AC Switch to activate onboard logging
If you're not familiar with the AC system in those vehicles, especially regarding the wiring, that information is definitely online. You can always leave it based on parameters only.