I've got the 2006 6MT with the '07 AT ECU.
I'm going to turbo the car (hopefully) this fall and I wanted to see if my V2 is capable of tuning boost?
I see there's a "boost table" button in the software but it doesn't do anything.
There's 10 columns on my table. Would I end up reducing the number of mBar columns (to lets say 5) and change over the remaining columns to PSI values? Or can more columns be added?
My plan is not going above 5 psi so I don't think I'll need a new MAP sensor but I may be wrong.
Thanks!
- Jason
2006 - Boost Capability?
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
2006 - Boost Capability?
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: 2006 - Boost Capability?
Finally got around to putting on the Ktuner sticker.
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: 2006 - Boost Capability?
We would need to expand the maps to add this support, but if you are willing to help test we are willing to make that happen.
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: 2006 - Boost Capability?
I would LOVE to be your guinea pig and lab rat for this!
I'm going to be doing this project in my spare time. Hopefully pulling the motor in August (which is probably a bad idea here in Texas).
Do you want me to email you externally?
- Jason
I'm going to be doing this project in my spare time. Hopefully pulling the motor in August (which is probably a bad idea here in Texas).
Do you want me to email you externally?
- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: 2006 - Boost Capability?
Yes, give me full specs and plans. We'll get it worked out!
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: 2006 - Boost Capability?
Email sent!
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness