Disabling immobilizer on 05-06 ECU?
Re: Disabling immobilizer on 05-06 ECU?
If your immobilizer is not sync'd to the ECU.
-
- Posts: 8
- Joined: Thu Sep 18, 2014 5:17 am
Re: Disabling immobilizer on 05-06 ECU?
it is not sync'd. I purchased a prepared end user ecu through ha motorsports. how do i go about disabling it in the software?
06 type s
PWJDM INTAKE
DCRH
TODA EXHAUST
comptech S/C in the works
PWJDM INTAKE
DCRH
TODA EXHAUST
comptech S/C in the works
Re: Disabling immobilizer on 05-06 ECU?
It's with the sensor/OBD2 disables under Main Parameters.
Re: Disabling immobilizer on 05-06 ECU?
If you want your car to start, u need to. What car is it in? Is your ecu already matched to the ecu? If so, then u don't need to disable it.
Re: Disabling immobilizer on 05-06 ECU?
Well i have a 2004 acura tsx with the 07 ecu. Would i take out the immobilizer and my car start or would i have to get it reflashed? I have the updated ktuner software but i dont see disable immobilizer in the setting. Would should i do?
Re: Disabling immobilizer on 05-06 ECU?
There's no disable for flash based ECUs. You'd need the ECU sync'd to your vehicle while your KTuner is unlocked since they'll change the VIN during the process.