which ECU for K24a2 swap
-
- Posts: 1
- Joined: Fri Jan 04, 2019 6:28 pm
which ECU for K24a2 swap
I'm putting a k24a2 into a 93 Civic Hatch. If I use an Element harness and 2005 Accord ECU, can that Accord ECU be reflashed to properly run a basically stock k24a2. Or, is it possible to have the 2006 TSX automatic ECU reflashed (or would it not work with Element harness)? I want the immobilizer disabled and most importantly, this is a budget build. So only basic components to get it running will be added...... cable TB, kswap header etc.
Re: which ECU for K24a2 swap
2005 Accord ECUs do not have a CEL output. It will work if you don't care about CEL. You'd be better off getting a KTunerSWAP ECU or PRB. There's a basemap for the TSX engine using PRB codebase right in the software.