Ktuner Enduser
Ktuner Enduser
Just received the Ktuner for a 2008 tsx manual the only thing I can tune is the fuel and ignition and change a few things I can real time tune nothing is selectable like cam angle limit advance features basically half the features that were listed in the sight I am very familiar with Neptune and how it works been using it four about 5 year love any help with this thanks
Re: Ktuner Enduser
There's a list on the product page for this platform. Everything in the final category.
http://ktuner.com/07tsx/
http://ktuner.com/07tsx/
Re: Ktuner Enduser
Yes I have seen the list but most of it is not active in the software
Re: Ktuner Enduser
Not every platform has every feature. Hence the list.
Re: Ktuner Enduser
Then look at the list your self for 08 tsx and you tell me cuz I'm not blind someone needs to check that list and correct it
Re: Ktuner Enduser
Just did...
Here's what's in the FINAL category. Which of these is missing? Every single one of these has settings.
Real-Time Logging - Obvious
Ignition/Fuel Tuning - Ignition and fuel maps
VTC Tuning - CAM Angle maps
Knock Tuning knock - limitation and retard maps
Rev Limiter Settings - Rev Limits/VTEC tab
2-Step Settings - Rev Limits/VTEC tab and 2-step section
Speed Density Fueling - Fuel maps, not MAF
VTEC Window Control - Rev Limits/VTEC tab
Closed Loop Control - Closed loop tab
Disable Sensors and OBD2 Monitors - Sensors/OBD2 tab
Fuel Cut Parameters - Fuel cut tab
Fuel Correction Parameters - Fuel corrections tab
Ignition Correction Parameters - Ignition corrections tab
Idle Control Parameters - Idle settings tab
Says right on the page above the list:
KTuner feature matrix for 07-08 TSX (BETA means the feature is currently in testing phases):
Here's what's in the FINAL category. Which of these is missing? Every single one of these has settings.
Real-Time Logging - Obvious
Ignition/Fuel Tuning - Ignition and fuel maps
VTC Tuning - CAM Angle maps
Knock Tuning knock - limitation and retard maps
Rev Limiter Settings - Rev Limits/VTEC tab
2-Step Settings - Rev Limits/VTEC tab and 2-step section
Speed Density Fueling - Fuel maps, not MAF
VTEC Window Control - Rev Limits/VTEC tab
Closed Loop Control - Closed loop tab
Disable Sensors and OBD2 Monitors - Sensors/OBD2 tab
Fuel Cut Parameters - Fuel cut tab
Fuel Correction Parameters - Fuel corrections tab
Ignition Correction Parameters - Ignition corrections tab
Idle Control Parameters - Idle settings tab
Says right on the page above the list:
KTuner feature matrix for 07-08 TSX (BETA means the feature is currently in testing phases):
Re: Ktuner Enduser
All of them except fuel and. Ignition maps are missing there and red not green should I unlock the ecu you and relock it will that I help
Last edited by lsturbo9 on Fri Jul 31, 2015 2:07 pm, edited 1 time in total.
Re: Ktuner Enduser
Open a file by going to File>New, like the tutorial video shows.
Real-time Tuning is not in the FINAL category.
Real-time Tuning is not in the FINAL category.
Re: Ktuner Enduser
I did do that and I know about the real time running in beta testing how about the rest I will try again and will let you know once I get the car back later on from getting an exhaust done
Re: Ktuner Enduser
If you click on those tabs you'll find those settings. Also a tuning map has ignition, fuel, knock, and cam angle maps in it. This is a newly released platform and more control will be added as it develops.