KTuner.com

Just received the Ktuner for a 2008 tsx manual the only thing I can tune is the fuel and ignition and change a few things I can real time tune nothing is selectable like cam angle limit advance features basically half the features that were listed in the sight I am very familiar with Neptune and how it works been using it four about 5 year love any help with this thanks

There's a list on the product page for this platform. Everything in the final category.

http://ktuner.com/07tsx/

Yes I have seen the list but most of it is not active in the software

Not every platform has every feature. Hence the list.

Then look at the list your self for 08 tsx and you tell me cuz I'm not blind someone needs to check that list and correct it

Just did...

Here's what's in the FINAL category. Which of these is missing? Every single one of these has settings.

Real-Time Logging - Obvious
Ignition/Fuel Tuning - Ignition and fuel maps
VTC Tuning - CAM Angle maps
Knock Tuning knock - limitation and retard maps
Rev Limiter Settings - Rev Limits/VTEC tab
2-Step Settings - Rev Limits/VTEC tab and 2-step section
Speed Density Fueling - Fuel maps, not MAF
VTEC Window Control - Rev Limits/VTEC tab
Closed Loop Control - Closed loop tab
Disable Sensors and OBD2 Monitors - Sensors/OBD2 tab
Fuel Cut Parameters - Fuel cut tab
Fuel Correction Parameters - Fuel corrections tab
Ignition Correction Parameters - Ignition corrections tab
Idle Control Parameters - Idle settings tab

Says right on the page above the list:
KTuner feature matrix for 07-08 TSX (BETA means the feature is currently in testing phases):

All of them except fuel and. Ignition maps are missing there and red not green should I unlock the ecu you and relock it will that I help

Open a file by going to File>New, like the tutorial video shows.

Real-time Tuning is not in the FINAL category.

I did do that and I know about the real time running in beta testing how about the rest I will try again and will let you know once I get the car back later on from getting an exhaust done

If you click on those tabs you'll find those settings. Also a tuning map has ignition, fuel, knock, and cam angle maps in it. This is a newly released platform and more control will be added as it develops.