I have read that Ktuner says our cars use Air Flow sensor to determine fuel?
Is it the MAF Scaling that is used to tighten up the STFT/Fuel table?
Ex: my car at idle shows 10% on STFT so, using the MAF scale I would ADD a % to get the STFT down closer to 0?
Could we please have a Fuel map added; as that would be the better way to tune and Data log our Fuel maps?
Thanks Ktuner
8th Gen Accord i4 Map/ No Fuel Maps?
-
- Posts: 4
- Joined: Wed Aug 03, 2022 12:38 am
- Location: Charlotte NC
- Contact:
8th Gen Accord i4 Map/ No Fuel Maps?
Last edited by IronGamerTV on Mon Aug 21, 2023 5:33 pm, edited 1 time in total.
Re: 8th Gen Accord i4 Map/ No Fuel Maps?
Mass Airflow vehicles use the MAF for airflow metering. You have MAF Flow and Fueling right there. There are no speed density fuel maps because it's a mass airflow vehicle.
-
- Posts: 4
- Joined: Wed Aug 03, 2022 12:38 am
- Location: Charlotte NC
- Contact:
Re: 8th Gen Accord i4 Map/ No Fuel Maps?
You can clearly see on your picture, there is the AFM Flow and AFM Fuel tables to determine fuel.IronGamerTV wrote: ↑Mon Aug 21, 2023 5:55 pm Meaning the MAF curve is all we have to use?
https://www.instagram.com/p/CwNp1KYgqU1/