Unable to establish a connection with the ECU
Unable to establish a connection with the ECU
My new Ktuner 1.2 was unable to establish a connection with the ECU of a 10th generation Honda Civic Si. The only instructions I could locate instructed me to switch the vehicle to accessory modegeometry dash subzero, which is incorrect. The vehicle must be powered on with the engine off. If your vehicle has a clutch, you will need to press the start button twice without engaging the clutch. If you are operating an automatic, you will need to manage your emotions.
-
Earl Walter
- Posts: 2
- Joined: Tue Aug 06, 2024 1:59 pm
Re: Unable to establish a connection with the ECU
Have you updated your Ktuner software to the latest version?terassda wrote: ↑Tue Jul 09, 2024 6:54 am My new Ktuner 1.2 was unable to establish a connection with the ECU of a 10th generation Honda Civic Si. The only instructions I could locate instructed me to switch the vehicle to accessory modegeometry dash subzero, which is incorrect. The vehicle must be powered on with the engine off. If your vehicle has a clutch, you will need to press the start button twice without engaging the clutch. If you are operating an automatic, you will need to manage your emotions.