Ktuner's Hardware Failures issues
Ktuner's Hardware Failures issues
It has been almost a week since I purchased a ktuner for my 2.0L 2016 Honda Civic EX. The song that was supposed to come with the gadget "only worked for the SI or EX-T," so I looked up a lot of youtube videos and tried to make my own. Prior to my knowledge of all things Naturally, being foolish and overexcited, I attempted to adjust the automobile. My car is now running unbearably slowly after I followed the instructions; when I floor it, geometry dash lite the gas starts to become sluggish. Not to add that all of the dash lights are illuminated. The automobile continues to perform the same even after I attempted to reset it back to factory settings. What can I do?
Re: Ktuner's Hardware Failures issues
If you modified a tune without knowing what you're doing, don't label that as a KTuner issue and especially not a KTuner Hardware Failure. Simply not accurate.
If you had two tunes to choose from when you started a basemap you likely chose the wrong one to start with because you simply didn't follow the directions in the tune description. Check your error code and see if it's a software incompatibility code. Choose the other software version, which would have been the correct one, if that's the case.
If you had two tunes to choose from when you started a basemap you likely chose the wrong one to start with because you simply didn't follow the directions in the tune description. Check your error code and see if it's a software incompatibility code. Choose the other software version, which would have been the correct one, if that's the case.