Page 1 of 1
End user stock k20z3 basemap?
Posted: Fri Jun 28, 2019 3:04 am
by Darb432
I am using a 2008 k20z3 engine running intake/header/exhaust featuring a 72mm throttle body. I am curious if Ktuner has any basemaps established for guys running the z3. From what ive read cams are different moreover than anything else.
I just want this thing started and timed well enough to take to a tuner and have him work it. Dont plan to drive anyplace. Any input appreciated. Thanks in advance
Re: End user stock k20z3 basemap?
Posted: Fri Jun 28, 2019 3:07 am
by Darb432
The evap crap is deleted, i have a cable actuated throttle body. Stock cams presently... have tsx cams i plan to run eventually. The engine is 87mm pistons... slight overbore
Re: End user stock k20z3 basemap?
Posted: Fri Jun 28, 2019 2:41 pm
by KTuner
You're doing something custom which would require custom tuning.
Re: End user stock k20z3 basemap?
Posted: Sat Jun 29, 2019 12:05 am
by Darb432
I guess a better question is. Does ktuner offer a basemap for a stock k20z3 in swap form using a throttle body of stock bore size of 70mm?
If not i see a market for that granted many swaps are k20z3 in stock form with dbw throttle body swapped for the ever popular 70mm cable actuated.
Re: End user stock k20z3 basemap?
Posted: Sat Jun 29, 2019 12:51 pm
by KTuner
That's something custom you'll need a custom tune for.