97DX EK W/k24a2 05 element ecu. Blown ign coil fuse.

[jfornachon]

I am using a factory 5 speed harness with an auto ecu. I have an issue where I can crank the engine with no spark or fuel. I had codes for both cam sensors. I replaced them still no fire. I noticed I had no fuel pressure so I checked the fuses and found the fuel pump good, but a blown 20A ign coil fuse. I have replaced the fuse and traced the wiring. I have tested by removing all connectors and slowly connecting them on by one. I have found the fuse only blows when I connect the grey A plug into the ecu.I am at a loss since there are not any wires that have continuity with that plug with everything connected, but that one plug.

Any guidance would be appreciated as I would love to get this vehicle running.

Have a great day,
jared

[KTuner]

Unfortunately wiring is beyond the scope of what we can offer assistance with.