Hello!
Is there any way to connect an external wideband like AEM UEGO in the 8th gen civics so I can use it as lamda overlay for tuning? I tried connecting it to the ELD but it didn't work!
Any suggestions?
Thanks!
External Wideband
Re: External Wideband
There's not currently. Those settings are for the KTunerECU applications.
Re: External Wideband
Thanks for the reply!
Maybe if I could connect it to the pins of the factory wideband (AFS+ and AFS-) and then adjust the volts - afr list ?
Do you think that may work?
Thanks!!
Maybe if I could connect it to the pins of the factory wideband (AFS+ and AFS-) and then adjust the volts - afr list ?
Do you think that may work?
Thanks!!
- Attachments
-
- 5645645.jpg
- (97.61 KiB) Not downloaded yet
Re: External Wideband
Definitely not. The ECU is specifically setup and designed to run the factory sensor only. The factory sensor is a wideband already.
Re: External Wideband
I only wanted to use the AEM just for tuning. Then I would reconnect the stock wideband for normal operations like closed loop etc.
The factory sensor is indeed a wideband but it does not work properly in boost!
While in boost I get way richer afr with the oem wideband compared to the AEM and it gives me big differences in the % difference on the lamda overlay tables!!
Thank you very much for your replies!
The factory sensor is indeed a wideband but it does not work properly in boost!
While in boost I get way richer afr with the oem wideband compared to the AEM and it gives me big differences in the % difference on the lamda overlay tables!!
Thank you very much for your replies!
Re: External Wideband
Are you also looking at the AFR.Adj item in the datalist?
Re: External Wideband
The "afr adj" is pretty close to reality to tell you the truth!
But the lamda overlay tables use the "afr" values not the "afr adj"!
I can use the "afr adj" with the datalogs unless theres a way to use the "afr adj" at the lamda overlay tables!
Thank you !!!
But the lamda overlay tables use the "afr" values not the "afr adj"!
I can use the "afr adj" with the datalogs unless theres a way to use the "afr adj" at the lamda overlay tables!
Thank you !!!
Last edited by cm1872 on Thu Sep 19, 2019 7:59 pm, edited 2 times in total.
Re: External Wideband
I'll look into adding an option for that.
Re: External Wideband
Thats perfect!!
Thanks!!
Thanks!!
Re: External Wideband
Hello!
Is there maybe any update on that?
Thank you!
Is there maybe any update on that?
Thank you!