Hi!
My Knock Control Value only goes down to .50. It looks like a software limitation and not my driving habits.
Can you take a look?
Thanks!
- Jason
Knock Control only goes down to .50
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Knock Control only goes down to .50
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: Knock Control only goes down to .50
Right. That's not something we change in Honda's settings. You have access to change knock retard and ignition values, so it's not relevant.
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: Knock Control only goes down to .50
Would I set the Knock Retard table to 0 negate it? Or would setting to 5 compensate the the control value of .50?
Also, what happens if I do have a knock? I thought the car would pull timing if knock is detected by default.
Thanks!
- Jason
Also, what happens if I do have a knock? I thought the car would pull timing if knock is detected by default.
Thanks!
- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: Knock Control only goes down to .50
I don't think you've read the help section for this logic.
http://ktuner.com/KTunerHelp/ignition_t ... ontrol.htm
http://ktuner.com/KTunerHelp/ignition_t ... ontrol.htm
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: Knock Control only goes down to .50
I did read it but it is still confusing.
How did you get the "knock limitation table value" to 2.0 in the example?
In the example picture, the only value with 2.0 is at MAP .2bar @ 5000 rpm.
How did you get the "knock limitation table value" to 2.0 in the example?
In the example picture, the only value with 2.0 is at MAP .2bar @ 5000 rpm.
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: Knock Control only goes down to .50
It says "Say in this example that we have", because it's an example.
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: Knock Control only goes down to .50
Ok, I re-read it, took a look at my logs with actual ignition, and got some good ol' pen and paper and makes more sense now you I know the value of 2 is just an example.
One other thing, I noticed there's no boost table visible for my Fit. Is that something that can be added or is the last value (.02 psi) carried throughout the rest of the boost table?
Thanks!
- Jason
One other thing, I noticed there's no boost table visible for my Fit. Is that something that can be added or is the last value (.02 psi) carried throughout the rest of the boost table?
Thanks!
- Jason
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: Knock Control only goes down to .50
As the tables are interpolated, if you exceed the last column that is what is used.
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: Knock Control only goes down to .50
Thank you!
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness