Fuel percent map
Fuel percent map
I don’t know if you ever used hondata kpro or not but kpro’s fuel percent table has hot key to clear the table after you tune it, does this kturner have this feature too, if yes what’s the hot key
Re: Fuel percent map
Thank you, might be hearing from me alot lol, new to this system I know the ends and outs of aem standalone, haltech, hondata, my thoughts was since I couldt play with the system prior to purchasing this unit and based off pictures and videos this system looks almost identical to hondata but so different
Re: Fuel percent map
It is definitely different! Hope you're enjoying, though.
Re: Fuel percent map
So far so good the preloaded maps, wow me I did a dyno pull on base map and compare it to to the one with the one with intake and rbc header map since this car has port rbc intake and short ram intake and exhaust, was very impressed gains with no tune, but got another question, is there way away to calibrate the tps so it reads close to 100% throttle angle, I tried that tps calibrate by calibrating 0v foot off and calibrating .5v with wot, all it did was rev hang 3k, read some of the forums stated that just calibrate only 0v with foot off
Re: Fuel percent map
Excellent.
The older platforms generally read around 80%-85% when fully open. That's why you'll notice the WOT TPS thresholds are in the 70%s.
The older platforms generally read around 80%-85% when fully open. That's why you'll notice the WOT TPS thresholds are in the 70%s.