Page 1 of 1
RSX BASE I/H/E BASEMAPS
Posted: Mon Jan 19, 2015 1:15 am
by xcuz
i just got my ktuner and i need a i/h/e basemap
i have a rsx base model
where i can download basemaps
Re: RSX BASE I/H/E BASEMAPS
Posted: Mon Jan 19, 2015 1:30 am
by KTuner
There's a video that shows you how to start a new file. File>New and you'll find the PND factory and reflash 1 to start from there.
Re: RSX BASE I/H/E BASEMAPS
Posted: Mon Jan 19, 2015 2:12 am
by xcuz
so i cant use a basemap that is same as the ktuner reflash I H E ?
Re: RSX BASE I/H/E BASEMAPS
Posted: Mon Jan 19, 2015 4:38 am
by KTuner
You're welcome to tune this any way you see fit. That's the point of the end user system.
If you want to start with a base that's correct for your engine you'll want what's listed under K20A3 02-06 RSX Base. Find the factory calibration and reflash 1 by going to File>New.
Re: RSX BASE I/H/E BASEMAPS
Posted: Tue Jan 20, 2015 1:21 am
by xcuz
i already did that they same i am looking for a reflash that is I/H/E file
cause all basemaps that is on ktuner is just stock no modification
i want a basemap that is same with the reflash one on the ktuner website for base rsx
Re: RSX BASE I/H/E BASEMAPS
Posted: Tue Jan 20, 2015 4:00 am
by KTuner
There are only two basemaps to start from for the base model RSX with KTuner. There are no other basemaps available at this time.
Factory
and
Reflash 1
Find them both by going to File>New listed under K20A3 02-06 RSX Base
Reflash 1 is the tune from the website for the base RSX.
http://ktuner.com/basersxreflash/
If you're referring to the IHE reflash for Type-S that does not apply to the base RSX. The base RSX is not a Type-S RSX.