Hi! I’ve wired in the can harness from hondata and will use a compatible 07 TL ecu.
Is there a starting point / basemap for the J30a4 engine or is it just the J32?
I wanted to ask before I sync the immo to the new ecu. If there’s not a map it’ll take me a weekend to tune it. If there’s a map I can do it on a week night.
Thanks,
- Jason
Starting point for 03-07 Accord v6-6MT J30a4
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Starting point for 03-07 Accord v6-6MT J30a4
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
-
- Posts: 39
- Joined: Tue Sep 05, 2017 4:20 pm
- Location: Dallas, Texas
Re: Starting point for 03-07 Accord v6-6MT J30a4
I also have the conversion harness for the ecu from Boomslang. I forgot to mention that.
2003 Accord V6 6MT. PCD, J-pipe, Ktuner v2, TL can and ecu conversion harness
Re: Starting point for 03-07 Accord v6-6MT J30a4
A factory starting point is included for tuning purposes.
-
- Posts: 19
- Joined: Sun Aug 08, 2021 5:20 pm
Re: Starting point for 03-07 Accord v6-6MT J30a4
I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening
Re: Starting point for 03-07 Accord v6-6MT J30a4
That's good to hear7thGenLucifer wrote: ↑Wed Aug 25, 2021 5:15 pm I have the same engine, the starting point tune isn't far off. I used it and was able to get things lined out in an evening