Page 1 of 1

37820-5AG-P83 ECU Cannot Enable P0299

Posted: Wed Oct 07, 2020 11:36 pm
by b6221
Hi KTuner,

I prefer to enable all stock ECU monitoring when calibrating/tuning my car. I used Stage 2 21 PSI Dual map as basemap in creating my custom tune. I could un-check the check box for P0299 - Underboost condition, and I could save the calibration normally (no error message).

However, when I re-open the calibration and check Disable/Monitors section, P0299 - Underboost condition disable option is automatically activated.

I checked the Beta codebase and Beta codebase has no issue because I can enable P0299 option and the option didn't activate automatically.

Please advise.

Thank You

Re: 37820-5AG-P83 ECU Cannot Enable P0299

Posted: Thu Oct 08, 2020 11:32 am
by KTuner
It's off by default on that codebase.

Re: 37820-5AG-P83 ECU Cannot Enable P0299

Posted: Thu Oct 08, 2020 4:23 pm
by b6221
KTuner wrote:It's off by default on that codebase.
Got it. Thanks for clarifying.

Re: 37820-5AG-P83 ECU Cannot Enable P0299

Posted: Thu Oct 08, 2020 4:46 pm
by KTuner
No problem