I wonder if I buy Ktuner(• End User System – Hardware/software. Datalog and make your own changes – $449), whether I'll be able to mount it on the ECU myself ?
ECU is 37820-RBB-E02
Euro Accord CL9 K24A3 190hp (same to Acura TSX 2004-2008)
installing the system ...
Re: installing the system ...
This is explained on the TSX / CL9 platform page.
http://ktuner.com/0406tsx/
What’s required?
• A KTuner prepped ECU. The factory TSX ECU cannot be used, as it does not have the pinouts required for our hardware. Our KTuner ECU is a direct bolt-in replacement for the factory ECU and does not require any additional wiring. You can keep your factory ECU for emissions testing if you choose.
http://ktuner.com/0406tsx/
What’s required?
• A KTuner prepped ECU. The factory TSX ECU cannot be used, as it does not have the pinouts required for our hardware. Our KTuner ECU is a direct bolt-in replacement for the factory ECU and does not require any additional wiring. You can keep your factory ECU for emissions testing if you choose.
Re: installing the system ...
how much it costs KTuner prepped ECU for Euro Accord CL9 K24A3 190hp ?
Re: installing the system ...
Please contact one of our dealers for pricing. If you're not sure where to go see TurbogixxerTuning.com, HAMotorsports.com, or Xenocron.com, as they have them available online.
-
- Posts: 2
- Joined: Thu Sep 01, 2016 1:13 pm
Re: installing the system ...
Hello here!
like rollin, I'm driving an Euro Accord CL9 K24A3 190hp, with ECU 37820-RBB-E01. Actually this ECU has been tune with Hondata basemap, and engine modification are Fujita CAI, FN2 inlet & throttle body, Weapon R exhaust manifold, decat pipe and catback exhaust.
I wonder to go futher, and probably fit an K20 head to build a frankenstein K24. But now I need a full tunable ECU.
My question is about harness compatibility. I know that there is some difference between EuroR & TSX ECU pinout. If I order an ECU prepared by Ktuner, is it ready to install or should I made some harness modification on my car ?
(I'm french, sorry if my english is not correct)
like rollin, I'm driving an Euro Accord CL9 K24A3 190hp, with ECU 37820-RBB-E01. Actually this ECU has been tune with Hondata basemap, and engine modification are Fujita CAI, FN2 inlet & throttle body, Weapon R exhaust manifold, decat pipe and catback exhaust.
I wonder to go futher, and probably fit an K20 head to build a frankenstein K24. But now I need a full tunable ECU.
My question is about harness compatibility. I know that there is some difference between EuroR & TSX ECU pinout. If I order an ECU prepared by Ktuner, is it ready to install or should I made some harness modification on my car ?
(I'm french, sorry if my english is not correct)
Re: installing the system ...
These ECUs are plug and play. I have not heard of any pinout differences or having to re-pin anything.
-
- Posts: 2
- Joined: Thu Sep 01, 2016 1:13 pm
Re: installing the system ...
There is some difference due to CAN bus:KTuner wrote:These ECUs are plug and play. I have not heard of any pinout differences or having to re-pin anything.
http://hondakarma.com/guides/hondata-fl ... ation.280/
Re: installing the system ...
If you order a prepared TSX ECU package it's not an 07-08 TSX ECU, so that does not apply.